Are you ready to freshen up your bathroom with a new exhaust fan? Installing or replacing a bathroom exhaust fan can seem intimidating. But with a few simple steps, you can tackle this project like a pro — even if you don’t have access to the attic! Let’s get started.
All Fired Up!
Before you can enjoy your brand-new exhaust fan, you need to get rid of the old one. To do this, you’ll need to start by disconnecting the power. Turn off the breaker to the bathroom and double-check that the power is off by flipping the light switch.
Next, you’ll want to remove the fan cover. Unscrew the cover and pull it away from the wall. Don’t forget to pull the cover away from the ceiling if it’s mounted up there.
Once the cover is off, you’ll be able to get to the fan itself. Unscrew the fan from the wall or ceiling and pull it away. The wiring should still be connected, so be careful not to mess with that.
A Breeze-y Bathroom Exhaust Fan Swap
Now that you’ve removed the old fan, it’s time to install the new one. The first step is to attach the exhaust fan housing to the ceiling or wall. Make sure it’s properly secured and level.
Next, you’ll need to connect the wiring. Connect the black wires together, the white wires together, and the green or bare copper wire to the ground. Secure the wires with the appropriate cable clamps.
Finally, attach the exhaust fan cover and turn the power back on. Your new exhaust fan should now be ready for use.
Replacing a bathroom exhaust fan without attic access is a breeze. Just be sure to turn off the power and double check the wiring connections before you turn it back on. Good luck!