Does your car alarm no longer respond to its remote? Not to worry! If you don’t have the remote, you can still activate your car alarm with a few simple steps. Read on to find out how to do it.
Let’s Activate That Car Alarm!
First, open up the hood of the car and locate the hood pin switch. This switch is usually a small, black, cylindrical piece of plastic that’s easy to spot. Once you have found the switch, press it gently until you hear the car alarm system make a beeping sound. This will indicate that the alarm is now active.
After that, get back inside the car and turn on the ignition. The car will detect the switch being activated and respond by sounding the alarm. To deactivate the alarm, simply turn off the car or press the hood pin switch once again.
Not Got the Remote? No Problem!
In case you don’t have the remote, you can still activate the car alarm using the manual override switch. This switch is usually located near the steering column and can be identified using the car’s manual.
Once you have located the switch, press it firmly and hold it down for at least 3-4 seconds. This will initiate the alarm system, which will start flashing its lights and sounding its siren. To deactivate the alarm, press the switch once again.
So there you have it! Activating your car alarm doesn’t have to be complicated. With these simple steps, you can easily activate your car alarm without a remote. All the best and have a great time!