Are you ready to turn your Whirlpool washer back on? If you have the Control Lock enabled, you will need to deactivate it first. Control Lock is a safety feature that prevents the washer from being accidentally started. It is easily turned on, but can be a bit tricky to deactivate. Follow these steps to ensure that you can get your washer up and running again in no time!
Wave Goodbye to Control Lock!
To deactivate the Control Lock, locate the Control Lock button on your Whirlpool washer. It is usually found on the front of the washer, just above the Start/Pause button. Press and hold the Control Lock button for at least 3 seconds. You should hear a beep, and the Control Lock light should turn off. Now your Control Lock is disabled and your washer is ready to start.
Let the Washer Spin Freely!
Once the Control Lock is disabled, you can now start the washer. First, fill the washer with laundry and detergent. Then select the cycle you want to use. Finally, press the Start/Pause button and the washer will begin its cycle. That’s it! You have successfully deactivated the Control Lock on your Whirlpool washer.
By following these steps, you can easily deactivate the Control Lock on your Whirlpool washer and get it running again. Now you can get back to doing laundry with no worries. So go ahead and wave goodbye to the Control Lock and get ready to start the washer!